bym11-50 thru bym11-1000, rgl41a thru rgl41m vishay general semiconductor document number: 88547 revision: 11-apr-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 1 surface mount glass passivated junction fast switching rectifier features ? superectifier structur e for high reliability condition ? patented glass-plastic encapsulation technique ? ideal for automated placement ? fast switching for high efficiency ? low leakage current ? high forward surge capability ? meets environmental standard mil-s-19500 ? meets msl level 1, per j-std-020, lf maximum peak of 250 c ? solder dip 260 c, 40 s ? component in accordance to rohs 2002/95/ec and weee 2002/96/ec typical applications for use in fast switching re ctification of power supply, inverters, converters, and freewheeling diodes for consumer, automotive and telecommunication. mechanical data case: do-213ab, molded epoxy over glass body epoxy meets ul 94v-0 flammability rating terminals: matte tin plated leads, solderable per j-std-002 and jesd22-b102 e3 suffix for consumer grade, meets jesd 201 class 1a whisker test, he3 suffix for high reliability grade (aec q101 qualified), meets jesd 201 class 2 whisker test polarity: two bands indicate cathode end - 1st band denotes device type and 2nd band denotes repetitive peak reverse voltage rating primary characteristics i f(av) 1.0 a v rrm 50 v to 1000 v i fsm 30 a t rr 150 ns, 250 ns, 500 ns v f 1.3 v t j max. 175 c patented* ? do-213ab *glass-plastic encapsulation is covered by patent no. 3,996,602, brazed-lead assembly to patent no. 3,930,306 maximum ratings (t a = 25 c unless otherwise noted) parameter symbol bym 11-50 bym 11-100 bym 11-200 bym 11-400 bym 11-600 bym 11-800 bym 11-1000 unit fast switching time device: 1st band is red rgl41a rgl41b rgl41d rgl41g rgl41j rgl41k rgl41m polarity color bands (2nd band) gray red orange yellow green blue violet maximum repetitive peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward rectified current at t t = 55 c i f(av) 1.0 a peak forward surge current 8.3 ms single half sine-wave superimposed on rated load i fsm 30 a maximum full load re verse current, full cycle average at t a = 55 c i r(av) 50 a operating junction and storage temperature range t j , t stg - 65 to + 175 c
bym11-50 thru bym11-1000, rgl41a thru rgl41m vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 88547 revision: 11-apr-08 2 notes: (1) thermal resistance from junction to ambient, 0. 24 x 0.24" (6.0 x 6.0 mm) copper pads to each terminal (2) thermal resistance from junction to terminal, 0. 24 x 0.24" (6.0 x 6.0 mm) copper pads to each terminal note: (1) automotive grade aec q101 qualified electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol bym 11-50 bym 11-100 bym 11-200 bym 11-400 bym 11-600 bym 11-800 bym 11-1000 unit maximum instantaneous forward voltage 1.0 a v f 1.3 v maximum dc reverse current at rated dc blocking voltage t a = 25 c t a = 125 c i r 5.0 50 a maximum reverse recovery time i f = 0.5 a, i r = 1.0 a, i rr = 0.25 a t rr 150 250 500 ns typical junction capacitance 4.0 v, 1 mhz c j 15 pf thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol bym 11-50 bym 11-100 bym 11-200 bym 11-400 bym 11-600 bym 11-800 bym 11-1000 unit maximum thermal resistance r ja r jt 75 (1) 30 (2) c/w ordering information (example) preferred p/n unit weight (g) referred package code base quantity delivery mode rgl41j-e3/96 0.114 96 1500 7" diameter plastic tape and reel rgl41j-e3/97 0.114 97 5000 13" diameter plastic tape and reel bym11-600-e3/96 0.114 96 1500 7" diameter plastic tape and reel bym11-600-e3/97 0.114 97 5000 13" diameter plastic tape and reel rgl41jhe3/96 (1) 0.114 96 1500 7" diameter plastic tape and reel rgl41jhe3/97 (1) 0.114 97 5000 13" diameter plastic tape and reel bym11-600he3/ 96 (1) 0.114 96 1500 7" diameter plastic tape and reel bym11-600he3/97 (1) 0.114 97 5000 13" diameter plastic tape and reel
bym11-50 thru bym11-1000, rgl41a thru rgl41m vishay general semiconductor document number: 88547 revision: 11-apr-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 3 ratings and characteristics curves (t a = 25 c unless otherwise noted) figure 1. forward current derating curve figure 2. maximum non-repetitive peak forward surge current figure 3. typical instantaneous forward characteristics a v erage for w ard rectified c u rrent (a) 25 50 75 100 125 150 175 0 0.25 0.50 0.75 1.00 1.25 terminal temperat u re (c) resisti v e or ind u cti v e load 1 10 100 0 10 15 20 25 30 nu m b er of cycles at 60 hz peak for w ard s u rge c u rrent (a) t j = t j max. 8 .3 ms single half sine- w a v e 0.4 0.6 0. 8 1.0 1.2 1.4 1.6 0.01 0.1 1 10 instantaneo u s for w ard v oltage ( v ) instantaneo u s for w ard c u rrent (a) t j = 25 c p u lse w idth = 300 s 1 % d u ty cycle figure 4. typical reverse characteristics figure 5. typical junction capacitance figure 6. typical transient thermal impedance 0 20 40 60 8 0 100 0.01 0.1 1 10 percent of rated peak re v erse v oltage (%) instantaneo u s re v erse c u rrent ( a) t j = 100 c t j = 25 c 1 10 100 1 10 100 re v erse v oltage ( v ) j u nction capaci tance (pf) t j = 25 c f = 1.0 mhz v sig = 50 m v p-p 0.01 0.1 1 10 100 0.1 1 10 100 mo u nted on 0.20 x 0.27" (5 x 7 mm) copper pad areas transient thermal impedance (c/ w ) t - p u lse d u ration (s)
bym11-50 thru bym11-1000, rgl41a thru rgl41m vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 88547 revision: 11-apr-08 4 package outline dimensions in inches (millimeters) do-213ab 1st b and denotes type and positi v e end (cathode) 1st band soldera b le ends d2 = d1 + 0 - 0.00 8 (0.20) d2 0.105 (2.67) 0.095 (2.41) d1 = 0.022 (0.56) 0.01 8 (0.46) 0.022 (0.56) 0.01 8 (0.46) 0.205 (5.2) 0.1 8 5 (4.7) mountin g pad layout 0.13 8 (3.5) max. 0.049 (1.25) mi n . 0.23 8 (6.0) ref. 0.11 8 (3.0) mi n .
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
